EasyManuals Logo

FiberHome AN5506-04-FS User Manual

FiberHome AN5506-04-FS
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
4
Web Configuration Guide
T
able 4.15 Parameters for MAC Address Filtering (Continued)
Item Description
filtering rule table will not be allowed to
pass.
MAC
Address
The MAC address in the MAC address filtering rule.
Start Time
The starting time of the filtering rule.
End Time
The ending time of the filtering rule.
Enable
Enables or disables this filtering rule. The options include
Disable and Enable.
4.4.1.8
IPv6 Mac Filtering
One
user device may have multiple IPv6 addresses but only one
MAC address. The user device access authority in the LAN can be
controlled effectively by setting the MAC address filtering. After the
fire wall is enabled, the pre-set rules will take effect, and the MAC
addresses that meet the filtering conditions will be filtered.
1. Select Security in the navigation bar and select FirewallIPv6
Mac Filtering in the left link bar, and then click Add to open the
MAC address filtering table configuration tab, as shown in
Figure 4.27.
101

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FiberHome AN5506-04-FS and is the answer not in the manual?

FiberHome AN5506-04-FS Specifications

General IconGeneral
TypeGPON ONT
Power Supply12V DC, 1A
Operating Temperature0°C to 40°C
Storage Temperature-40°C to 70°C
Humidity5% to 95% (non-condensing)
Wi-Fi2.4 GHz
PON InterfaceGPON
Ports4 x 10/100/1000 Mbps Ethernet, 2 x POTS

Related product manuals