FiberHome AN5506-04-FS User Manual

4
Web Configuration Guide
3. Click Apply to save and apply the configuration.
4.4.7
HTTPS
The
ONU provides the HTTPS function. The HTTPS is the HTTP
channel for security. It is built on the SSL+HTTP protocol, which can
perform encryption transmission and identity authentication.
1. Select Security in the navigation bar and select HTTPS in the
left link bar to open the HTTPS function configuration tab, as
shown in Figure 4.35.
Figure
4.35 HTTPS
2
. Select to Enable or Disable the HTTPS function as required.
Caution:
After
enabling the HTTPS function, log into the Web GUI. The
protocol type in URL should be https and the management IP
address should be added with the port number 4433, e.g. https://
192.168.1.1:4433.
3
. Click Apply to save and apply the configuration.
4.5
Application
The
following introduces how to configure the VPN, DDNS, port
forwarding, port triggering, NAT, UPNP, DMZ and network diagnosis
in the Web GUI.
110

FiberHome AN5506-04-FS Specifications

General

Type	GPON ONT
Power Supply	12V DC, 1A
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% (non-condensing)
Wi-Fi	2.4 GHz
PON Interface	GPON
Ports	4 x 10/100/1000 Mbps Ethernet, 2 x POTS