FiberHome AN5506-04-FS User Manual

4
Web Configuration Guide
T
able 4.6 Parameters for Broadband Settings (Continued)
Item
Description
period expires.
IP
Address
Enter the static IP address at the WAN
side provided by ISP.
This item should be
configured when the
WAN IP Mode is set
to static.
Subnet
Mask
Enter the subnet mask provided by ISP.
Default
Gateway
Enter the default gateway provided by
ISP.
Primary
DNS
Server
Enter the IP address of the active DNS
server provided by ISP.
Second-
ary DNS
Server
Enter the IP address of the standby DNS
server provided by ISP.
IPv6
Address
Enter the static IPv6 address at the WAN
side provided by ISP.
This item should be
set when IPv6 is
enabled and the
WAN IP Mode is set
to static.
IPv6
Prefix
Length
Enter the static IPv6 address prefix
length at the WAN side provided by ISP.
Default
Gateway
Enter the default gateway provided by
ISP.
Primary
DNS
Server
Enter the IP address of the active DNS
server provided by ISP.
Second-
ary DNS
Server
Enter the IP address of the standby DNS
server provided by ISP.
83

FiberHome AN5506-04-FS Specifications

General

Type	GPON ONT
Power Supply	12V DC, 1A
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% (non-condensing)
Wi-Fi	2.4 GHz
PON Interface	GPON
Ports	4 x 10/100/1000 Mbps Ethernet, 2 x POTS