Press RAIN key to view rain history:
Rain rate: it forecast the rain per hour base on the recently 10 minute’s
rainfall. For example: the rainfall of recent 10 minutes is 12mm, the
rain/hour is 12mm*6=72mm/h.
Rain event: It start to record the rain event value form the rain falls, the rain
event is over and value reset to 0 if last 24 hour rainfall less 1mm and the
Day: 24 hr period from 0:00 - 24:00.
Week: defined by calendar week i.e. Sunday – Saturday.
Month: defined by calendar Month i.e. January 1 - January 31.
Total: running total since station was powered up
Reset week rain, will auto reset day rain
Reset month rain, will auto reset week and day rain.
Reset total rain, will auto reset month, week and day rain.
1) When power on, press WIND/+ and PRESSURE /- key to reset the weather
station and clear all records memory, and clears all user settings to default.
2) When power on, press TEMP. key to skip receive RF signal.
3) The setting procedure can be exited at any time by either pressing the
LIGHT /SNOOZE key or waiting for the 30-second time-out to take effect.
The Set Mode allows you to change date, time, units of measure and other
important functions, as referenced in Figure 16.
To enter the Set Mode, press and hold the SET key for two seconds (SET + 2
seconds). To advance each command, press (do not hold) the SET key.
To Next Page
Loading...
Need help?
General