Fine Offset Electronics WH2950 - 6.6 Max;min mode; 6.6.1 Press and release MAX;MIN key to display MAX data; 6.6.2 Press again to display min data; 6.7 Calibration mode

27
10. High wind setting
11. High gust setting
12. Rain rate high setting
13. Rain day high setting
6.6 Max/min mode
6.6.1 Press and release MAX/MIN key to display MAX data
- Press TEMP. key to view wind chill, heat index and dew point max.
- Press RAIN key to view rain rate, rain day, rain week and rain month max.
- Press WIND/+ to view wind and gust max.
- Press PRESSURE/- to hold 2 seconds to view pressure absolute and relative
max.
6.6.2 Press again to display min data
- Press TEMP. key to view wind chill and dew point min.
- Press PRESSURE/-to hold 2 seconds to view pressure absolute and relative
min.
Note: press and hold 2s MAX/MIN button to reset all max or min.
press MAX/MIN key third time back to normal mode or press LIGHT
/SNOOZE key back to normal mode.
6.7 Calibration mode
Hold the TEMP. and MAX/MIN key together for 5 seconds to enter calibration
mode.