Fine Offset Electronics WH2950 - 6.5 Alarm mode; 6.5.1 View Alarm value; 6.5.2 Alarm setting mode

25
6.5
Alarm mode
6.5.1 View Alarm value
Press and release ALARM key to display high alarm，Press ALARM key again
to display low alarm. Press ALARM key third time or press LIGHT /SNOOZE key
return to normal mode.
In alarm mode:
- Press RAIN key to shift display rain rate or day rain alarm data.
- Press WIND/+key to shift display wind or gust alarm data.
6.5.2 Alarm setting mode:
Hold the ALARM key for 2 seconds to enter alarm setting mode:
1. Time of Day Alarm. The hour will begin flashing. Press the WIND/+ or
PRESSURE/- key to change the hour value. Press the SET key to set the
minute value. The minute will begin flashing. Press the WIND/+ or
PRESSURE/- key to increase or decrease the minute value.
2.
Press the ALARM key to turn the alarm on or off (if the alarm is enabled, the
alarm icon will be turned on).
3. Indoor Temperature High Alarm. Press the SET key to set the indoor
temperature high alarm. The indoor temperature will begin flashing. Press
the WIND/+ or PRESSURE/- key to change the indoor temperature alarm
value.
4. Press the ALARM key to turn the alarm on or off (if the alarm is enabled, the
alarm icon will be turned on).
5. Indoor Temperature Low Alarm. Press the SET key to set the indoor
temperature low alarm. The indoor temperature will begin flashing. Press