Fine Offset Electronics WH2950 User Manual

55
Step 4: Connect the power adapter to the LCD Screen’s power socket. The
display will then power up.
The LCD will begin to register the outdoor sensor and receive weather data.
Refer photo.
Note, the wind direction will read approximately 180º S. This needs to be
recalibrated for the Southern Hemisphere.
Step 5: Press the TEMP Key and MAX/MIN key to enter calibration mode.
Refer photo.
Use the Set Key switch to the Wind Direction calibration value which will be
TEMP Key and MAX/MIN key

Fine Offset Electronics WH2950 Specifications

General

Brand	Fine Offset Electronics
Model	WH2950
Category	Weather Station
Language	English