Rain gauge
reports rain
when it is not
raining
An unstable mounting solution (sway in the mounting pole) may
result in the tipping bucket incorrectly incrementing rainfall. Make
sure you have a stable, level mounting solution.
Data not
reporting to
Wunderground.
com
1. Confirm your password or key is correct. It is the password
you registered on Wunderground.com. Your
Wunderground.com password cannot begin with a
non-alphanumeric character (a limitation of
Wundeground.com, not the station). Example, $oewkrf is not
a valid password, but oewkrf$ is valid.
2. Confirm your station ID is correct. The station ID is all caps,
and the most common issue is substituting an O for a 0 (or
visa versa). Example, KAZPHOEN11, not KAZPH0EN11
3. Check your router firewall settings. The console sends data
1. Check for WiFi symbol on the display. If wireless
connectivity is successful the WiFi icon will be displayed
in the time field.
2. Make sure your modem WiFi settings are correct (network
3. Make sure the console is plugged into AC power. The console
will not connect to WiFi when powered by batteries only.
4. The console only supports and connects to 2.4 GHz routers. If
you own a 5 GHz router, and it is a dual band router, you will
need to disable the 5 GHz band, and enable the 2.4 GHz
band.
5. The console does not support guest networks.
To Previous Page
Loading...
Need help?
General