e. Use the 3-Axis bracket to adjust the camera to appropriate angle.
f. Before you close the dome cover, make sure that the black rubber band
sticks to the inside of the cover completely. Crook or uneven rubber band
may cause the waterproof defective.
g. Lock tightly the screws on the dome cover to ensure there's no gap
between the lid and base.
h. Note: When you connect cables into machine, we advise to use a hose to
include all the cables inside instead of plugging in several cables
separately, because water may step down the gap of cables into machine.
You can also seal the connector hole by silicone after installation.
To Next Page
Loading...