fine Ip camera - Server Setting; Mail Setting; Ftp

4. Server setting
The settings of Email, FTP and SAMBA are used when the event happens,
schedule snapshot executes, or the alarm input is triggered. Select the item
to display the detailed configuration options. You can configure either one or
all of them.
a. Mail Setting:
Set up the server address and account information of your e-mail.
Click “Apply” to save the setting, then use “Test” button to test the server
connection. A message box will tell you “OK!” if it works, and a test e-mail
will be sent to receiver’s mail address.
b. FTP:
Set up the server address and account information of your FTP. Click
“Apply” to save the setting, then use “Test” button to test the server