7.5 Automatic control by the Special Sensors with their “High/Low” limit settings.
Ex, Below settings will turn on switch #3 when reading is above “28” and turn off switch #3 when
reading is below “26”.
(Note: “High Limit” Control is for cooler, and “Low Limit” Control is for Heater)
7.6 Automatically switch control scheduled by HyperSecureLink software.
Ex: The switch #1 will turn on at 19:00 and turn off at 07:05 everyday.
The switch #2 will turn on at 07:15 and turn off at 09:00 everyday.
To Next Page
Loading...