Need help?Do you have a question about the FineControl LS-20 and is the answer not in the manual?
General| Brand | FineControl |
|---|---|
| Model | LS-20 |
| Category | Security System |
| Language | English |
Lists key capabilities and functionalities of the LS-20.
Explains the function of the LEDs and their color indications.
Details the ports and connectors on the back of the LS-20 base unit.
Describes the different ways the base unit can be physically installed.
Explains system status through beeps and LED patterns.
Guides setting up the LS-20 for GSM communication via USB.
Details accessing the LS-20 using HyperSecureLink or Mobile App locally.
Explains how to access the LS-20 remotely over the internet.
Describes connecting to a cloud server for advanced home management services.
Outlines connecting to a CMS for professional alarm monitoring.
Step-by-step guide to adding sensors and controllers to the system.
Advises on positioning the base unit and sensors for best signal reception.
Details the system's behavior and arming sequence when away from home.
Explains protection settings when residents are at home.
Describes the mode for disabling alarms while monitoring events.
Outlines how the system reacts to burglar alarm triggers.
Covers system response to fire, panic, medical, and environmental alarms.
Describes how to view recorded system events and activities.
Explains how to check the status and signal strength of connected devices.
Details configuring switches using HyperSecureLink software or a remote controller.
Explains controlling devices via software, mobile apps, or cloud services.
Describes controlling switches using the system's keypad.
Explains automating switch actions based on sensor triggers.
Details automating control based on environmental sensor high/low limits.
Covers setting up automated switch operations based on a schedule.
Covers system tests like Siren Test, Clear Status, and Device Test.
Configures delays for arming and disarming sequences.
Sets times for internal/external sirens and sensor supervision.
Configures remote siren, pre-warning, and home automation timing.
Manages voice recording/playback and doorbell functions.
Configures tamper alerts and entry delay warnings.
Controls the inner siren and audible chirps for mode changes.
Configures how various device statuses are displayed and managed.
Sets parameters for zone types like 24-Hour, Home Mode, Pre-warning.
Manages inactivity monitoring and sensor supervision intervals.
Configures high/low limits and control for environmental sensors.
Configures wired sensor types and trigger/away modes.
Covers system configurations like deny arm, RF jamming, factory reset.
Configures reporting to CMS and TCP/IP alarm reports.
Sets up automated switch operations and system arm/disarm schedules.
Manages predefined scenes for switch and operation modes.
To Next Page