Appendix A: Ethernet Interface Settings
Ethernet Interface can be configured as a server to be accessed remotely by the proprietary
HyperSecureLink software or mobile App MyHome. It also can be configured as a client to send
poll/alarm signal to a web server or CMS (Central Monitoring Station) service provider.
A1, System connection diagram for LS-20 as a server to be accessed by the
HyperSecureLink Software or mobile App MyHome from Internet.
Note: Mobile App MyHome is from third parties and are not free, please refer to the web sites:
https://play.google.com/store/apps/details?id=com.uioo.uioomyhome
https://itunes.apple.com/app/id946734736
A1.1, Ethernet Interface sets up as a server.
Connect the devices as below, please make sure you have installed the VCOM software in your PC first.
To Next Page
Loading...