EasyManua.ls Logo

FineControl LS-20 - Device Status Configuration Options

FineControl LS-20
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
* Inner Siren: ON/OFF (default, ON)
Inner Siren On: Enable the Inner Siren.
Inner Siren Off: Switch off the Inner Siren. (The Siren keeps silent in alarm and warning states.)
The conditions for the Inner Siren to go off when alarm trips:
1. The Inner Siren is enabled.
2. The Alarm With Siren attribute of the sensor is Yes.
3. The Inner Siren Time (8.2) has been set.
* Mode Change Chirp: ON/OFF (default, OFF)
Mode Change Chirp On: The Sirens sound short chirps (Disregard the Inner Siren status) when the
operation mode changes by Remote Controller or Wireless Keypad.
(Disarm: 1 chirp, Away: 2 chirps, Door Open warning: 5 chirps).
Mode Change Chirp Off: The Sirens will keep silent when the operation mode changes.

Table of Contents