A2, System connection diagram for LS-20 as a client to send signal to a cloud server or
Central Monitoring Station through Internet.
(This setting is only valid for the user who has CMS or cloud services. User has to know the IP
address and port number of the CMS or cloud server before setting the Adaptor.)
Note: For the cloud services or Central Monitor Station please refer to web sites:
Cloud Services: www.livingpattern.co or www.abell-security.com
Central Monitor Station: www.iklomp.com
A2.1, Ethernet Adaptor sets up as a client.
Connect the devices as below, please make sure you have installed the VCOM software in your PC first.
To Next Page
Loading...