To Next PageTo Next Page
Need help?Do you have a question about the finetech FINEPLACER lambda and is the answer not in the manual?
Outlines the system's use for positioning fine pitch devices like Flip Chips and MEMS.
Explains the Vision Alignment System's operation and key features.
Details the step-by-step process for component positioning and placement.
Defines intended use, warns against misuse, and outlines warranty terms.
Provides critical safety guidance regarding the equipment's weight and handling.
Offers essential safety precautions for working with electrical mains power.
Covers protection measures for ESD sensitive devices and EMC compliance.
Details hazards related to heat, fire, and potential burn risks during operation.
Discusses environmental conditions and other potential hazards in the workspace.
Introduces the FINEPLACER lambda as a versatile, modular bonding system.
Lists and describes the primary components of the FINEPLACER system.
Details the function and features of the base plate.
Explains the positioning table's height adjustment and its role.
Describes the support arm and the parts it holds.
Details the pivot arm, its mounting, and functions.
Describes the Placer Control Box, its functions, and connections.
Provides a brief overview of the system's core functions and installation.
Details the critical procedure for connecting the equipment to mains power.
Explains the various indicators, switches, and controls on the system.
Describes how vacuum and compressed air are generated and connected.
Outlines the connections and functions related to placer support.
Details camera control and power supply for optional modules.
Explains the RS-232 interface for PC communication and software updates.
Describes the module interface for system expansion and communication.
Provides essential operating instructions for the Placer Control Box.
Details the correct procedure for powering on the Placer Control Box.
Explains how to adjust the brightness of the equipment's illumination.
Clarifies the vacuum control system, its functions, and status indicators.
Details the safety system designed to prevent component loss during vacuum operations.
Lists and describes key parts, controls, and indicators of the system.
Guides through the initial installation and setup of the FINEPLACER system.
Details the preparation steps for core system components and subassemblies.
Explains how to prepare the positioning table tracks for substrate placement.
Guides on selecting and fitting appropriate placement heads for the pivot arm.
Details the crucial electrical and pneumatic connections for system setup.
Covers essential preliminary settings and final checks before system operation.
Provides crucial procedures for calibrating and fine-tuning placement accuracy.
Lists the specific tools needed for accurate placement adjustments.
Explains how to differentiate between the FINEPLACER lambda A6, A7, and A7+ models.
Details the step-by-step process for achieving precise component placement accuracy.
Guides on calibrating the placement arm to ensure coplanarity.
Explains how to set and adjust the lock position for manual optics shifting.
Details the procedure for correctly loading components onto the system.
Guides through the critical alignment process of component and substrate.
Describes the final steps for placing components after successful alignment.
Outlines routine preventive maintenance procedures to ensure optimal performance.
Specifies safety and personnel requirements for performing maintenance.
Details how to move the positioning table to its designated maintenance position.
Lists essential daily checks, cleaning, and maintenance tasks.
Outlines the maintenance tasks required on a monthly basis.
Details specific maintenance procedures to be performed quarterly.
Covers annual checks and potential recalibration needs.
Explains how to address and resolve equipment faults and failures.
Lists and explains the various connection ports and their functions.
General| Brand | finetech |
|---|---|
| Model | FINEPLACER lambda |
| Category | Industrial Equipment |
| Language | English |
