FINEPLACER
®
lambda
Rev-Nr. 1.1
ATTENTION! SUPPLY MEDIA LIKE, E.G., COMPRESSED AIR OR INERT GAS, MUST HAVE A QUALITY
ACCORDING TO THE STANDARDS DEFINED IN
DIN ISO 8573-1, CLASS 4, WITH REGARD TO OIL,
WATER
, AND PARTICLE CONTENTS. OTHERWISE, SERIOUS MALFUNCTIONS MUST BE EXPECTED AND
PARTS OF THE EQUIPMENT CAN BE DAMAGED
. ANY DAMAGE DUE TO INSUFFICIENT MEDIA PURITY WILL
NOT BE COVERED BY WARRANTY
.
Comply with the special safety conditions given with the descriptions of the modules.
With the Finetech Bonding Force Applicators in particular, beware of bruising fingers
or damaging the work piece.
Air purity according to DIN ISO 8573-1, Class 4, stands for the following demands:
• Particle size 15 µm
• Particle density 8 mg/m³
• Pressure dew-point 3°C
• Water content 6000 mg/m³
To Next Page
Loading...