Finn 5 Series - Engine to Blower Coupling

MB50 MU0518 Rev. A
53
WHEN ORDERING PARTS, BE SURE TO STATE
SERIAL NUMBER OF MACHINE
ENGINE TO BLOWER COUPLING
Ref. No. Part Number Description No. Req’d
1 075880 Engine (see Engine section) 1
2 008811 Mounting Ring Spacer 1
3 052025 Flywheel Adapter Plate 1
4 052001 Flange 1
5 011774 Rubber Insert 1
6 011772 Coupling Flange Half 1
7 F705-0031 Coupler Guard 2
8 075290 Blower 1
9 F705-0023 Blower Mount 1
10 075205 Bushing Isolator 2
11 325180 Blower Adapter Plate 1
12 075607 Machining Coupling Standoff 1
13  7/16 - 14 x 1-1/4 in. LG Hex Head Cap Screw 4
 7/16 in. Lock Washer 4
 14 M10 x 30 8
  M10 Lock Washer 8
15  M10 x 55 12
 M10 Lock Washer 12
 16 1/2 - 13 x 1-1/4 in. LG Hex Head Cap Screw 4
  1/2 in. Lock Washer 4
 17 1/2 - 13 x 1-1/4 in. LG Hex Head Cap Screw 4
  1/2 in. Lock Washer 4
NOT SHOWN
 075612 5/16 x 2 in. Z-Key for Coupling to Blower 1
  5/16 in. Setscrew for Coupling to Blower 2
KITS AND MARKERS
 Standard Hardware Item