39
WHEN ORDERING PARTS, BE SURE TO STATE
SERIAL NUMBER OF MACHINE
POWER TAKE-OFF ASSEMBLY
Ref. No. Part Number Description No. Req’d
1 012069 Power Take-Off Assembly - SAE #4 w/10" Clutch 1
2 100345 10" Twin Disc Clutch Assembly 1
3 Driving Ring 1
4 Hub and Back Plate 1
5 Driving Plate 1
6 Floating Plate 1
7 Yoke Adjusting Assembly 1
8 Adjusting Lock Pin 1
9 Adjusting Lock Pin Spring 1
10 Finger Pin 4
11 Adjusting Yoke 1
12 Finger Lever 4
13 Cotter Pin 4
14 Sliding Sleeve Assembly 1
15 Lever Link Pin 8
16 Lever Link 8
17 Cotter Pin 8
18 Sliding Sleeve 1
19 Collar Assembly 1
20 Nut 2
21 Collar 1
22 Shim 2
23 Hex Hd. Cap Screw 2
24 Pilot Bearing 1
25 Hub Nut 1
26 Lock Washer 1
27 Release Spring 6
28 Hex Hd. Cap Screw 1
29 Lock Washer 1
30 Bearing Retainer Lock 1
31 Headless Set Screw 1
32 Bearing Retainer 1
33 Roller Bearing 1
34 Hub Key 1
35 Shaft 1
36 Key 1
37 Fitting 1
38 Roller Bearing 1
39 Operating Shaft 1
40 Woodruff Key 2
41 Hex Hd Cap Screw 2
42 Lock Washer 2
43 Throwout Yoke 1
44 Fitting 2
45 Fitting 1
46 No. 1 SAE Housing 1
47 Flat Gasket 1
48 Instruction Plate 1
49 Round Hd. Cap Screw 2
50 023811-01 Modified Clutch Handle 1
51 Hex Hd. Cap Screw 1
IMPORTANT
FINN B260 Straw Blowers have
been provided with NACD & Twin
Disk Clutch Assemblies. Refer to
FINN Technical Bulletin #2005-
0010 to determine which clutch
you have. Then refer to the follow-
ing documents for the appropriate
replacement parts information:
NACD Power Take-Off
Service Manual (For 6-1/2",
7-1/2", 8", 10" & 11-1/2"
"HE" Clutches).
Twin Disc Power Take-Off
Service Manual (For CE-
106-SP, CE-107-SP, C-106-
SP & C-107-SP Models).
To Next Page
Loading...
