ENGLISH 13
Important Notes 13
Cable Requirements 14
Cable Types 14
Earthing 14
Screening 14
Cable Routing 14
RS 485 Networking 14
Mains Supply 14
STEP 1 - Mounting the panel 15
STEP 2 - Pre Commissioning Checks 15
STEP 3 - Install the Batteries 16
STEP 4 Commissioning 16
Panel Checks 16
HELP key 17
Auto addressing procedure 17
Programming Device Addresses Using the
Programmer 18
Adding Text and Zone Information Without
Software 19
Testing the Devices and monitoring 19
Walk Test procedure 19
STEP 5 Useful Menu Options 19
How to Access the Event Log 19
Loop Check Screen 20
How to View the Device Status 20
How to Disable Points 20
How to Disable Sounders 20
How to load a language present in a USB stick 20
This document has been designed to guide you through the BASIC installation and setup process for FC501 control panels. A
full reference Installation and Commissioning manual is available on disk with all panels, or can be downloaded from our web
site at www.fireclass.net
References
All FC501 panel manuals are available on the CD supplied with the panel. All FC501 panel manuals and datasheets are
available on our website www.fireclass.net
.
The manufacter reserves the right to change the technical specifications of these products without prior notice.
To Next Page
Loading...
