First Light C-RED 3 - Page 56

56
getflat_hdr_c2 <url> Download a flat correction file to be used with C2
capacitor in HDR mode from URL
getbias <url>
Download a bias correction file from URL
getbias_hdr_c1 <url> Download a bias correction file to be used with C1
capacitor in HDR mode from URL
getbias_hdr_c2 <url>
Download a bias correction file to be used with C2
capacitor in HDR mode from URL
imagepattern Returns the current image pattern selection (FW 1.3.0
or above)
events Get camera events sending activation status
extsynchro Get usage of external synchronization status
extsynchro polarity
Get external synchronization polarity inversion
configuration
extsynchro exposure Get external synchronization exposure configuration
extsynchro source Get source signal for external synchronization (FW
1.1.0 or above)
swsynchro
Get usage of software synchronization status
swsynchro source Get software synchronization source (FW 1.1.0 or
above)
nbframesperswtrig
Get the number of frames acquired for each software
trigger
swtrig Generate software trigger
swtrigabort
Abort software trigger (FW 1.1.0 or above)
extmarker source Get source signal for frame marker (FW 1.1.0 or above)
cropping
Get cropping status
cropping columns Get cropping columns
cropping rows
Get cropping rows
version Get product versions
version firmware
Get firmware version
version firmware detailed Get detailed firmware version
version firmware build
Get build version
version fpga Get FPGA version
version hardware
Get hardware version
status Get camera status
status detailed
Get last status change reason
continue Continue camera starting even if at the last use, the
camera was in error
save Save current camera settings into the current active
preset
restorefactory
Restore factory parameters and reboot the camera
preset Get current preset id
ipaddress
Get IP address of the camera
telnet Get telnet status
cameratype
Display camera information
shutdown Shutdown the camera
reboot
Reboot the camera