Fischer Panda 10000i PMS - Replace the Air Filter Mat

Maintenance Instructions
15.2.13 Kapitel/Chapter 7: Maintenance Instructions - Seite/Page 129
Fig. 7.20-1: Valve open1. Cam shaft
2. Cam follower
3. Push rod
4. Adjusting screw
5. Counter nut
6. Rocker arm
7. Valve
8. Crankshaft
Fig. 7.20-2: Valve closed1. Cam shaft
2. Cam follower
3. Push rod
4. Adjusting screw
5. Counter nut
6. Rocker arm
7. Valve
8. Crankshaft
7.20.1 Replace the air filter mat
Clearance of intake and
discharge valve (cold)
Factory specification 0.145 to 0.185 mm
0.00571 to 0.00728 inch