Installation Instructions
15.2.13 Kapitel/Chapter 5: Installation Instructions - Seite/Page 55
Fig. 5.3-2: Generator connections
5.4 Installation of the cooling system - raw water
5.4.1 General information
The genset should have its own raw water (coolant water) inlet and should not be connected to any other engine
systems. Ensure that the following installation instructions are complied with:
5.4.2 Fischer Panda installation kit - raw water
Note:The following additional components will be required for the
specified installation. You can purchase them as an installation
kit or separately at Fischer Panda.
Fig. 5.4.2-1: Thru hull fitting with strainerThrough hull fitting with strainer
Fig. 5.4.2-2: Sea cockSea cock
1. Connection external ventilation valve
To Next Page