Fischer Panda 10000i PMS - Sensors and Switches for Operating Surveillance

Panda 8000i PMS generator
15.2.13 Kapitel/Chapter 4: Panda 8000i PMS generator - Seite/Page 49
4.3.6 Sensors and switches for operating surveillance
Fig. 4.3.6-1: Thermo.switch at engineThermo-switch at engine
The thermo-switch at the engine is used for monitoring the
engine temperature.
Fig. 4.3.6-2: Thermo-sensor at exhaust connectionThermo-sensor at exhaust connection
If the impeller pump drops out and deliveries no more raw
water, the exhaust connection becomes extremely hot.
Fig. 4.3.6-3: Thermo-switch coilThermo-switch coil
One thermo sensor is located in the stator winding