| Installation
14
|
50152755 Fisherbrand
Chapter 3
Risk of overheating with stacked devices
To avoid the risk of electrical components and the outer enclosure overheating or
temperature control failing due to insufficient ventilation, do not exceed the specified
stacking height!
Risk of tipping and dropping of stacked devices
You should be aware at all times that stacked devices do not form a stable unit, even
when the stacking pads and frames are correctly used. The top device may tip over
and drop down when being transported in a stack. To avoid injury to persons and
damage to equipment, do not attempt to move stacked devices as a unit! Separate and
move each device one by one, then restack them.
To Next Page
Loading...