Fisherbrand Basic 60L - Chapter 8 Handling and Control; Operator Mode

| Handling and Control
30
| 50152755 Fisherbrand
Chapter 7
Operator mode
This mode is entered at power on.
Press to scroll through the parameters, then press or to set the required value.
ON: Controller output power up
For internal use only
For internal use only
Down button
Up button
Function button (scroll button)
Upper Display Lower Display Description
PV Value Active SP Value PV (measuring value) and target value of
selected SP (setpoint)
SP Value
SP
Setpoint value
Active Alarms
AlSt
Process variable only. Read only
Offset
OFFS
Enables the adjustment of the temperature
offset. The adjusted value will be added to
the displayed actual temperature (PV-value).
This can be used to calibrate the incubator.