| Product Description
18
|
50152755 Fisherbrand
Chapter 4
Work Space Components
Inner Chamber
All components of the work space are made of corrosion-resistant stainless steel and have an
absolutely smooth and easy-to-clean surface. Any embossings have a large radius.
Access Port
A re-sealable, capped access port (can be closed off using the plugs delivered with the unit)
allows cables, hoses or additional sensor leads to be routed into the work space of the incubator.
The small access port [1] is secured with a membrane. Cut off before use.
The main access port [2] has a diameter of 42 mm/1,65 inch.
NOTE
Operating conditions
When accessories are to be operated in the work space of the incubator, the ambient
condition requirements must be observed. The energy introduced into the work space has
an impact on the lower end of the temperature control range. When additional heating
sources are introduced into the work space, temperature control may be adversely
affected.
To Next Page
Loading...