Fisherbrand 50152755 | 21
Start-up
Installing the Shelf System
The installation of the shelf system does not require any tools. The support rails are secured in
place by spring action. Once the shelf support have been inserted into the rails, the perforated
shelves can be simply pushed onto their support hooks to complete the installation.
Initial Installation
1. Peel off the protective foil from the support rails.
2. Push the retaining spring [1] into the guide on the support rail [2], making sure that the
locking nub [3] on the retaining spring safely engages with the matching hole in the support
rail.
.
Figure 5-1. Sliding the Retaining Spring into the Support Rail
To Next Page
Loading...