Fuses
Fuses
REPLACING A FUSE
WARNING: Always make sure the
affected electrical circuit is switched
off and the vehicle is OFF, before replacing
a fuse.
CAUTION: Only use Fisker
Automotive approved replacement
fuses of the same rating and type, or fuses
of matching specification. Using an
incorrect fuse may result in damage to the
vehicle’s electrical system and can result in
a fire
CAUTION: If the replacement fuse
blows after installation, the system
should be checked by Fisker Automotive or
your local Fisker Automotive Retailer.
Identify the fuse protecting the affected
circuit, using the label on the inside of the
fuse box cover or as shown on the following
pages, and pull to remove. A break in the
wire inside the fuse indicates that the fuse
has blown.
Note: Fisker Automotive recommend that
owners do not remove or replace relays.
Failure of any of these items should be
investigated by a qualified technician.
ENGINE COMPARTMENT FUSE
BOX
Release the plastic cover by pressing the
tab arrowed.
The fuse values and locations and the
circuits protected are shown on the plastic
cover.
Owner's Handbook - US English.book Page 18 Friday, June 22, 2012 11:28 AM
To Next Page
Loading...
