Seats and Steering Column
Seats and Steering Column
DRIVER’S SEAT MEMORY
WARNING: Before activating the seat
memory, ensure that the area
immediately surrounding the seat is clear of
obstructions and that all occupants are
clear of moving parts.
The vehicle can memorize two different
driver seat and steering column positions.
The seat and steering column position are
stored against the key fob currently used to
unlock the vehicle. When you unlock the
vehicle, the seat and steering column will
automatically adjust to the stored memory
position for that key fob.
Adjust the seat and steering column to the
desired position, and then store the
program in the seat memory via the touch-
screen. See the procedure below.
Touch the SYSTEM icon
Touch the SETTINGS icon
Touch the up arrow to access the
Interior & Easy Entry/Exit selection.
Touch the Enable setting.
Touch the up arrows to access the
Memory/Seat Position selection.
Adjust the driver seat and steering wheel for
Driver #1.
Touch the lock/unlock buttons on Driver
#1’s key fob. This stores the memory
position for Driver #1.
Touch the Set selection (under the Primary
Seat Memory selection).
Repeat the above steps for the Secondary
Seat Memory.
EASY ENTRY AND EXIT
Entry and exit mode provides automatic
movement of the steering column and
driver’s seat making it easier to enter or exit
the vehicle.
Note: This feature can be enabled or
disabled via the vehicle’s touch-screen, see
Vehicle settings
, page 5.13.
Exit
When the Start/Stop button is pressed, the
steering column will move to the uppermost
tilt position and the driver’s seat will move to
the exit position.
Entry
When the driver’s door is closed and the
Start/Stop button is pressed, the steering
column and driver’s seat will return to the
previous position.
Note: If the steering column or driver’s seat
is adjusted during entry or exit operation,
automatic movement will stop.
Owner's Handbook - US English.book Page 4 Friday, June 22, 2012 11:28 AM
To Next Page
Loading...
