1 Safety Instructions
1. To prevent device damage caused by misoperation, P1 can only be used by trained
users. Do not operate the device with suspicious defects or obvious mechanical
damage.
2. Use the components or accessories that come with the device, or other accessories
recommended by FJDynamics.
3. Always follow the safety instructions when operating the device to avoid personal
injury.
1.1 Laser Safety
1. This device satisfies the requirements of the following standards regarding the laser
safety:
IEC 60825-1:2014; and
21 CFR 1040.10 and 1040.11, except for deviations (IEC 60825-1 Ed.3) pursuant to
Laser Notice No.56, dated May 8, 2019.
2. Although the device complies with Class 1 safety standards, do not use a microscope, a
magnifying glass in any form, or other magnifying devices to look directly at the lasers.
3. For maximum self-protection, do not look directly at the running LiDAR.
1.2 Device Operation Safety
1. Do not cover the battery and the charger during charging.
2. Do not block or interrupt the LiDAR when it is rotating.
3. Do not plug and unplug the connecting cables repeatedly.
To Next Page
Loading...