Dreamer NX User Guide | www.flashforge.com
6-20
Method 2： Connect Via WiFi
1. Turn on Dreamer NX.
2. Turn on Wi-Fi on the Dreamer NX. Tap [Tools]-[Setting]-[WiFi]-[WiFi ON].
3. A connection called “USR-WiFi232-G2” can be found on the list of available
networks. Connect to this network.
4. Open your Internet browser. Type in “10.10.100.254” and hit [Enter] on
your keyboard. Enter the username and password to login. The default
username and password are both “ admin” The control panel will appear after
5. Click on [Work Mode] and choose “AP+STA mode” and save it.
To Next Page
Loading...
