19
1.Open the installed Orca-Flashforge. 2. Setup Wizard:
Follow the setup wizard prompts for selecting
your region, machine type, and materials.
(Note: You can select all machine types and
material types in the list for later slicing options.)
3. Account Login/Register:
Log in to Orca-Flashforge using your
Flashforge account. If you don't have
an account, register one using your mobile
phone number. (Note: Flash Maker and
Orca-Flashforge share the same account.)
4. Create or open a project for slicing. You can
select the machine type, material, and
recommended parameters in the printer,
filament, and process bars.
5. After slicing, select the printer and
send for printing.
6. You can remotely monitor the printing progress
and pause/stop printing when necessary on
the device interface. (Note: Real-time
monitoring is only available with a camera
installed and activated.)
Printing plate
File:3DBenchy.3mf
3DBenchy
To Next Page
Loading...
