6600 – 6665 – 6700 – 6765
E
N
G
L
I
S
H
24
7 - BASIC PROGRAMMING MODE
6700 / 6765
7.5 REGENERATION CYCLE PROGRAMMING
to
The cycle 6 will not be viewed if the cycle 5 is cancelled [5 --- O F F ]
7.10 Press the button . The next displays are part of a series of option settings used to program the regeneration
cycles. Up to 6 cycles can be programmed. A led identifies only the 4 first cycles. Each display is used to set
the duration time (in minute) of each regeneration cycle.
The first display in the series is regeneration cycle 1, example: Backwash
Ex.: - Cycle 1 (Backwash): 8 minutes [1 - - - 8.0]
- Cycle 4 (Brine refill): 8.4 minutes (8 min and 24 s.) [4 - - - 8.4]
ExITING BASIC PROGRAMMING MODE
Press once again the button. the electronics returns in service.
To Next Page
Loading...
