SECTION 1 - SAFETY
page 1-6
SAFETY DECALS
KEEP SAFETY DECALS CLEAN
. Wipe clean when
necessary.
CHECK
that the safety decals are not obstructed by the
openers. If the decals are covered up, replace in a location
that is clear to view.
REPLACE
missing or unreadable decals. New decals are
available from your dealer.
To replace decals:
1. Remove the old decal. Clean the area where the new
decal will be affixed.
2. Remove the decal backing. Carefully affix the decal to
the drill.
3. Work the air bubbles out from under the decal. Use a
clean piece of paper or the decal backing itself.
To Next Page
Loading...