SECTION 3 - MAINTENANCE
page 3-8
MAINTENANCE TABLE
Refer to the table below for routine maintenance and lubrication intervals. Service items below either daily, weekly or
annually or at the hours indicated in the table. Copy this maintenance table to continue your records.
DATE
SERVICED BY
10 HOURS (DAILY)
GREASE - Load level bar ball sockets
GREASE - Level bar pivot pin
GREASE - Caster wheel walking beams
DATE
SERVICED BY
50 HOURS (WEEKLY)
GREASE - Front gauge wheel caster pivots
GREASE - Hitch pole pivots
GREASE - Front and rear wing hinges
CHECK - Wheel bolts
CHECK - Tire pressures
DATE
SERVICED BY
200 HOURS (SEMI-ANNUALLY)
GREASE - Gauge wheel pivot
GREASE - Ratchet jacks
GREASE - Wheel bearings
GREASE - Transport lock pivots
DATE
SERVICED BY
500 HOURS (ANNUALLY)
CHECK - Machine for loose bolts
CHECK - Frame for cracks
CHECK - Openers for loose bolts
REPACK - Wheel hubs
To Next Page
Loading...