SECTION 4 - ADJUSTMENTS
page 4-3
CAUTION!
AIR DRILL LEVELING
Disengage power and shut down tractor, be
certain all moving parts have stopped before
servicing, adjusting, cleaning or unclogging the
equipment.
Always be sure air drill is hooked to a stable
device before raising or lowering wings.
Never operate wing lift system when anyone is
within radius of the wings.
Always follow correct operating procedure when
folding and unfolding wings.
To begin leveling, start with the center section. Leveling
should be done from left to right and then from front to
back. When the center section has been leveled, level the
wings.
Final leveling should be done in the field with the drill at
working depth.
To Next Page
Loading...