flexicoil 6000 - Winging up; Winging down

To Next Page

To Previous Page

SECTION 2 - OPERATION

page 2-7

WINGING UP

1. Activate the depth control hydraulic circuit to raise the

implement to maximum height.

2. Engage the depth control safety lock.

3. Engage the floating hitch safety lock.

4. Activate the wing lift circuit and raise the implement

to full transport position.

IMPORTANT: Never try to wing up the drill without having the frame raised all the way. If the drill is winged

up with the frame down, damage to the machine could result. Never lower the frame with the

drill in transport position.

WINGING DOWN

1. With the depth control safety lock in place, activate the

wing lift hydraulics to lower the wings.

2. Raise the implement to the maximum height using the

depth control hydraulics. Return the depth cylinder

safety lock and the floating hitch safety lock to the

unlocked position.