5
2 Setup and Overview
Apply Window Protector Sheet (Optional)
The bottom viewing window is made of a strong, scratch-resistant plastic. It may get scratched
when carrying the scanner around. You can protect it with either a carrying case or by applying
an optional window protector sheet.
The window protector sheet provides additional protection against scratches to the bottom
viewing window. Do not apply it to the scanner bed. To apply it, follow these steps:
1. Clean the bottom viewing window of any dirt
or fingerprints if needed.
2. Peel corner of the protector sheet away from
the backing. Align sheet along one side of
the bottom window, matching the corners.
Carefully hold the protector sheet at the
corners when applying to eliminate any oils
or fingerprints that may remain on the
protector.
3. Lay the sheet down while sliding a credit card
across the window protector to apply. To
reposition, gently lift up and reapply. Any “bubbles” remaining after you smooth out the
sheet will not affect scan quality.
4. Replace window protector as needed. Replacement sheets can be ordered from www.flip-
pal.com.
To Next Page
Loading...
