Set Date and Time
The scanner performs a quick self-test then asks you to set the date and time. Here is the
screen you will see.
Use UP ARROW and DOWN ARROW to change the value within each
field. Use LEFT ARROW and RIGHT ARROW to scroll to each of the
fields in turn, starting with Month and ending with AM/PM.
When you are satisfied with all settings, move the highlight to Done and
press OK to save the settings and go to the Home Screen. If you want to skip this step, you
can just press the green scan button; the scanner will use either the default date and time, or
the latest one set.
Home Screen
Review Screen
After you have scanned, you will see the Review Screen, with the most-recently scanned
image.
Use LEFT ARROW to scroll backwards through previous scans and RIGHT ARROW to scroll
forward.
To Next Page
Loading...
