FLIR A400 Series User Manual

RTSP Streams
10
It is possible to establish streaming sessions with the Smart Sensor, the Advanced Smart
Sensor, and the Advanced Image Streaming cameras of the FLIR A400/FLIR A700
series.
The following URLs can be used:
• rtsp://<IP>/avc?source=0
• rtsp://<IP>/mpeg4?source=0
• rtsp://<IP>/mjpg?source=0
• rtsp://<IP>/avc?source=1
• rtsp://<IP>/mpeg4?source=1
• rtsp://<IP>/mjpg?source=1
The section after <IP> refers to the encoding:
• /avc = H264 encoding
• /mpeg4 = MPEG4 encoding
• /mjpg = Motion JPEG encoding
The section after the encoding refers to the source, which can be either 0 or 1:
• ?source=0 will start a streaming session giving you the identical video as seen in the
web interface. This can be IR, visual, MSX, or FSX, and the feed is 640 x 480 pixels.
Add the &overlay=off argument in the URL to receive a feed without overlay.
• ?source=1 will start a streaming session giving you the uncropped visual image at
1280 x 960 pixels.
A radiometric 16-bit stream is also available for software supporting it.
#T810409; r. AB/66574/66574; en-US
17

FLIR A400 Series Specifications

General

Brand	FLIR
Model	A400 Series
Category	Digital Camera
Language	English