Camera web interface
11
11.1 Supported browsers
The camera web interface supports the following browsers and versions:
• Google Chrome 77 and higher,
• Microsoft Edge 17 and higher,
• Mozilla Firefox 69 and higher.
Note Microsoft Internet Explorer is not supported.
11.2 Login
You can login to the camera web interface by using either the MAC address (printed on a
label on the back of the camera) or the IP address of your camera.
Follow this procedure:
1. Do one of the following:
a. Identify your camera by the MAC address in FLIR IP Config, and then double-
click it.
b. Type the IP address of your camera into the address bar of a web browser.
This displays the login view.
2. When logging in for the first time, login in with username admin and the default ad-
ministrator password provided by FLIR.
Note
• The users viewer and user are disabled by default, but can be enabled by an admin
user.
• It is possible for several users of the type viewer and user to log in to the camera at
the same time. Any changes to the settings and adjustments to an image made by
one user will be seen by the other logged in users.
• If you are logged in as an admin user, you will be logged out if another admin logs in.
11.3 Navigation
This image shows what the camera web interface looks like when you have logged in.
Figure 11.1 Camera web user interface, FLIR A400/FLIR A700
#T810409; r. AB/66574/66574; en-US
18
To Next Page
Loading...
Need help?
General
