Introduction
5
5.1 General description
The FLIR ETS3xx is FLIR’s first electronic test bench camera, designed for a quick tem-
perature check of PCB boards and electronic devices. The FLIR ETS3xx is sensitive
enough to detect subtle temperature difference with an accuracy of ±3°C, so you can
quickly find hot spots and potential points of failure. The 320 × 240 pixel infrared detector
offers more than 76 000 points of temperature measurement, eliminating the guesswork of
legacy measurement tools. Designed specifically for bench-top work, the battery-powered
FLIR ETS3xx connects to your PC for immediate analysis and sharing of thermal data.
5.2 Benefits
• Reduces test times: Quickly identify hot spots, thermal gradients, and potential points
of failure.
• Improves product design: Know where and when to add fans and heatsinks, and en-
sure products are operating within specification for their maximum lifetime.
• Saves money: Improve rapid prototyping and reduce product development cycles.
• Optimizes lab time: Battery powered and hands-free, and offers complete measure-
ment and analysis in the camera.
5.3 Key features
• >76 000 points of non-contact temperature measurement at the push of a button.
• 320 × 240 pixel detector provides crisp thermal imagery.
• Time versus temperature measurement with FLIR Tools+.
• Small-component measurement, down to 170 µm per pixel spot size.
• Lens offers a 45° thermal view of the target for the quick detection of hot spots.
• Records radiometric imagery in standard JPEG format for easy sharing.
• ±3% accuracy promotes quality assurance and factory acceptance of PCBs.
• Quickly mounts on the supplied stand for immediate use.
• Crisp 3 in. LCD display provides immediate thermal feedback.
• World-class software provided for advanced measurement corrections/capabilities.
#T810252; r. AA/41997/41997; en-US
9
1.888.475.5235info@FLIR-Direct.com
FLIR-DIRECT.com
To Next Page
Loading...
Need help?
General
