427-0089-00-12 Version 160 March 2019 58
This document does not contain any export-controlled information.
Advanced Configuration
moving object is detected by the FC-Series ID, the trk-101-P can control and move the PTZ camera
to autonomously track and zoom in on the motion.
Step 1 Select Maintenance > Sensor > VMS Remote.
Step 2 Click + ( ).
Step 3 From the drop-down list,
select IOI Interface.
Step 4 Click Create.
Step 5 Accept the message “Data for INTERFACE2 saved
correctly”.
Step 6 Using the Start button at the bottom of the page,
Stop and Start the server.
Click Accept at the prompt.
The status will show Server
Stopped.
Click on the Start button again
to restart the server.
Click Accept at the prompt.
The status will show Server
Running.
Link Cameras on trk-101-P Tracker
Link the PTZ camera and the FC-Series ID from the trk-101-P web interface.
Step 1 Ensure that the FC-Series ID Analytics have been calibrated (refer to Analytics
Calibration, pg. 50).
Step 2 With the FC-Series ID Analytics turned off, login to the trk-101-P and set presets for the
bound PTZ camera and link the preset scenes to the FC-Series ID scene.
Click
Select
Click
To Next Page
Loading...
Need help?
General
