427-0089-00-12 Version 160 March 2019 68
This document does not contain any export-controlled information.
Advanced Configuration
Note
In the Ethernet Loopback Reset section, selecting No disables the capability to restore the camera’s
Factory Defaults (including its IP address and settings, user passwords, and configuration file) by
temporarily connecting a loopback device to the Ethernet port during initial power-up. The default
setting is Yes. For more information, see Restoring the Factory Settings, pg. 70.
Use the Log page to set logging parameters. Scroll down and select the Download button under
Field Support Log to download a zip file to the computer for field service evaluation.
It is also possible to download a camera's configuration files using the following HTTP URL:
http://<ip>/configFilesGet.php, where <ip> is the camera's IP address.
You can manually test the URL or download the files by typing the URL in a web browser.
For security reasons, you cannot download the keys.ini file. The download consists of all other
configuration files.
To Next Page
Loading...
Need help?
General
