© 2015 I-View Now, LLC. All Rights Reserved.
Flir M3200/M4200 Series Installation Guide rev 1.0 Page 10
Recording Setup
The Flir DVR records video VIA 2 different stream types. I-ViewNow utilizes the sub-stream from the DVR.
Encoding Settings
The Encoding setup determines format of the video record onto the DVR. For clips to be decoded properly the frame
rate must be set to 15 FPS or less on the recording channel being utilized. I-View Now suggests setting up all recording
channels in this manner to avoid any potential issues when upgrading or adding cameras to the system.
Navigate to Camera>Recording
Select Continuous for one type and Sub
Stream 1 for the other (see example)
Select Compression
Select Appropriate Channel
Set Compression H.264 for both
Set Resolution CBR for both
Set Continuous to FPS 25
Set Sub Stream 1 to FPS 5
Set Regular Stream Bit Rate to 4096
Set Extra Stream Bit rate to 224
Click Apply/Save
To Next Page
Loading...
Need help?
General
