7
Chapter 1
Using The Test Tool
Goal of this Chapter
This Chapter provides a step-by-step introduction to the
test tool. The introduction does not cover all of the
capabilities of the test tool but gives basic examples to
show how to use the menus perform basic operations.
Powering the Test Tool
Follow the procedure (step 1 to 3) in Figure 1-1 to power
the test tool from a standard ac outlet. See Chapter 2 for
battery power instructions.
Turn the test tool on.
The test tool powers up in its last setup configuration.
Figure 1-1. Powering the Test Tool
To Next Page
Loading...
