Fluke 123 - Triggering on a Specific Video Line

Using The Test Tool
Acquiring the Waveform
1
23
Changing the TrendPlot Reading
To toggle the TrendPlot reading between MIN (minimum),
MAX (maximum), and AVERAGE, do the following:
e Change MIN into MAX reading.
f Change MAX into AVG reading.
Note that the date and time stamp now updates
continuously to indicate the most recent change in a
reading.
Turning Off the TrendPlot Display
g Turn TrendPlot off again.
Acquiring the Waveform
Making a Single Acquisition
To catch single events, you can perform a single shot.
(One time screen update.) To set up the test tool for a
single shot on the input A waveform, do the following:
• Connect the probe to the signal to be measured.
c Open the SCOPE INPUTS menu.
d Open the SCOPE OPTIONS
submenu.
e Highlight SINGLE SHOT.
f
(2x)
Accept the set up for a Single
Shot.