Fluke 123 - Dual Input Oscilloscope Vertical

Fluke 123/124
Users Manual
54
Resetting the Test Tool
Perform a Master Reset to make sure that your test tool is
in the initial settings condition.
c Turn the test tool off.
d Press and hold.
e Press and release.
The test tool turns on, and you should hear a double beep,
indicating the Reset was successful.
f Release.
Changing the Information Language
When you operate the test tool, messages appear on the
screen. These messages are always displayed in a box,
and can be displayed in various languages.
If you want to change the language of the messages into
e.g. Italian, do the following:
c
Open the USER OPTIONS menu.
d Open the LANGUAGE SELECT
submenu.
e Highlight ITALIANO.
f Accept ITALIANO (Italian) as
language.