Fluke 123 - Acquiring the Waveform; Making a Single Acquisition

Using The Test Tool
Making Measurements
1
15
To choose also a Peak-to-Peak measurement for Input B,
do the following:
c
Open the INPUT B menu.
d
Highlight ON.
e
Turn Input B on. Observe that the
highlight jumps to the present
main measurement.
f
Highlight PEAK...
g
Open the PEAK submenu.
h
Highlight PEAK-PEAK.
i
Accept the pk-pk measurement.
Now, you will see a screen like Figure 1-8.
Figure 1-8. Hz and Vpp as Main Readings